1/27/2024 0 Comments Toilet float valveI don't know if this is a good long-term solution, and I suppose silicone lubricant from the hardware store would be a better idea. /rebates/2fc2fToilets-toilet-seats-Bathroom&252fc252fToilets-toilet-seats-Bathroom26tc3dbing-&idlowes&nameLowe27s&ra1. I decided to use some medical lubricant (generic version of KY jelly) I had on hand. I didn't try searching very hard, but this quickly found link suggests it would be a bad idea to use a petroleum-based lubricant. I tried cleaning the pin and seal, but I still found resistance when moving the arm. The black rubber seal was easy to remove, and I found that the arm moved without resistance once this seal was off. Buy Fluidmaster by Delchem B704A 8.5 Toilet Cistern Bottom Inlet Float Valve & Float Kit from our Plumbing & Heating range - Build & Plumb Building. On the underside of the cap, I saw the black rubber seal with a pin that slides through it as the arm goes up and down. Here is what the cap and arm look like when removed. It was easy to pull off this seal and confirm that the arm went up and down without resistance when the seal wasn't there. However, on the underside of the cap was a rubber seal that was causing lots of resistance. I found that in my case, after removing the cap off of the valve, the float was sliding up and down on the shaft very easily, so that didn't seem to be the problem. I did what BMitch described in his answer, and found the video linked by Lawrence Kesteloot to be very helpful just to understand what we're talking about.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |